51.2V 200Ah 10.24KWh Home Energy storage battery wall Mounted Battery
Rongke Wall mounted battery storage for home solar system is an integrated battery solution that can store your solar energy for backup protection. So your power will keep on when the grid goes down. This allows you to use solar energy to power your home appliance and reduce your dependence on the grid.
Home Energy storage battery Wall Mounted Type Battery
Features
●Use safer lithium iron phosphate batteries(LiFePO4)
●Integrated Intelligent Battery Management System (BMS):
-Prevent overcharge, over discharge, and high current inside the battery to ensure battery safety and reliability.
- Balance each battery to extend battery life.
- With RS485 and CAN communication interfaces, it can meet the communication needs of different devices
●With LCD display to display detailed battery parameters
●Compatible with most inverters on the market
●Mainly used in home energy storage system, support OEM/ODM
Electrical Characteristics
Nominal Voltage (M) :51.2V
Nominal Capacity (Ah) : 200Ah@0.3C
Nominal Capacity (KWh) :10.24KWh
Cycle Life≥6000 Cycles @0.3C/0.3C
Serial Number: 16S1P
Commnication Port: RS485/CAN
Charging Parameters
Charge Voltage (V) :57.6V
Charge Current (A) :30A (Recommend )
Max Charge Current (A) :50A
Peak Charge Current (A) :100A
Charging Mode: Constant Current /Constant Voltage
Operating Environment
Charge Temperature: 0°C to 55°C
Discharge Temperature: -20°C to 60°C
Storage Temperature: 0°C to 40°C
Other Parameters
Shell Material: Sheet metal chassis
Battery Size: 600（L）*460（W）*225（H）mm
Pack Weight: 92Kg
Protection Class: IP55
Installation Method: Wall mounted
Certificate: UN38.3/MSDS/CE
Usage Note:
1. The charging voltage of the battery shall not exceed the parameters in the specification
2. When the battery is in use, the discharge voltage shall not be lower than the parameters listed in the specification, otherwise the low-voltage protection may be triggered
3. The charging current and discharging current of the battery shall not exceed the parameter range listed in the specification; otherwise the battery may be damaged
